pH-Responsive fluorescent supramolecular nanoparticles based on tetraphenylethylene-labelled chitosan and a six-fold carboxylated tribenzotriquinacene

• Nan Yang,
• Yi-Yan Zhu,
• Wei-Xiu Lin,
• Yi-Long Lu and
• Wen-Rong Xu

Beilstein J. Org. Chem. 2023, 19, 635–645, doi:10.3762/bjoc.19.45

• , conventional fluorescent dyes exhibit aggregation-caused quenching (ACQ) when introduced into nanoparticles at high loads, resulting in poor fluorescence imaging quality. In recent years, tetraphenylethylene (TPE)-based dyes have been frequently used to overcome the ACQ problem due to their unique aggregation

Synthesis, optical and electrochemical properties of (D–π)₂-type and (D–π)₂Ph-type fluorescent dyes

• Kosuke Takemura,
• Kazuki Ohira,
• Taiki Higashino,
• Keiichi Imato and
• Yousuke Ooyama

Beilstein J. Org. Chem. 2022, 18, 1047–1054, doi:10.3762/bjoc.18.106

• band, but also intense fluorescence emission both in solution and the solid state. Keywords: (D–π)2 structure; fluorescence; fluorescent dyes; photoabsorption; redox properties; Introduction The design and development of a new type of organic fluorescent dyes have been of considerable scientific and

• ][16][17][18][19][20][21][22], as well as fluorescent probes [23][24][25][26][27][28] for bioimaging and fluorescent sensors for specific target species [29][30][31][32]. Among many kinds of organic fluorescent dyes, much efforts have been made on the development of donor–π–acceptor (D–π–A)-type

• fluorescent dyes constructed of an electron-donating moiety (D) and an electron-withdrawing moiety (A), linked by a π-conjugated unit thanks to their intense photoabsorption and fluorescence emission characteristics originating from the intramolecular charge transfer (ICT) excitation from the D to the A

Synthesis of dibenzosuberenone-based novel polycyclic π-conjugated dihydropyridazines, pyridazines and pyrroles

• Ramazan Koçak and
• Arif Daştan

Beilstein J. Org. Chem. 2021, 17, 719–729, doi:10.3762/bjoc.17.61

• fluorescent dyes 3a,b in detail. In the present study, the effects of functional groups with different conjugations on maximum absorbance (λmax, abs) and emission (λmax, ems), and wavelengths of dihydropyridazines 3c–f and 3k were investigated. Compounds 3c,d, with high conjugation, show the highest

Dawn of a new era in industrial photochemistry: the scale-up of micro- and mesostructured photoreactors

• Emine Kayahan,
• Mathias Jacobs,
• Leen Braeken,
• Leen C.J. Thomassen,
• Simon Kuhn,
• Tom van Gerven and
• M. Enis Leblebici

Beilstein J. Org. Chem. 2020, 16, 2484–2504, doi:10.3762/bjoc.16.202

Styryl-based new organic chromophores bearing free amino and azomethine groups: synthesis, photophysical, NLO, and thermal properties

• Anka Utama Putra,
• Deniz Çakmaz,
• Nurgül Seferoğlu,
• Alberto Barsella and
• Zeynel Seferoğlu

Beilstein J. Org. Chem. 2020, 16, 2282–2296, doi:10.3762/bjoc.16.189

• /deprotonation processes [23][24][25]. Fluorescent dyes as chemosensors offer unique merits such as low energy consumption, ease of handling, high selectivity, and notable sensitivity [26][27]. Moreover, some fluorescent dyes demonstrate remarkable ICT characteristics, and could therefore serve as NLO dyes [11

• ][12][13][14]. Among dyestuffs classes, the push-pull fluorescent dyes are renowned to own such special behaviors. The push-pull dyes generate higher charge delocalization upon excitation, thus enhance both polarizability and fluorescence emission [12][13][14][18]. The charge delocalization upon

Cation-induced ring-opening and oxidation reaction of photoreluctant spirooxazine–quinolizinium conjugates

• Phil M. Pithan,
• Sören Steup and
• Heiko Ihmels

Beilstein J. Org. Chem. 2020, 16, 904–916, doi:10.3762/bjoc.16.82

• been shown that derivatives thereof have a great potential to serve as functional units in DNA-binding ligands [54], fluorescent dyes and chemosensors [55][56][57][58][59]. Furthermore, we have already demonstrated that styryl-substituted quinolizinium derivatives exhibit ideal photophysical and DNA

Regioselectively α- and β-alkynylated BODIPY dyes via gold(I)-catalyzed direct C–H functionalization and their photophysical properties

• Takahide Shimada,
• Shigeki Mori,
• Masatoshi Ishida and
• Hiroyuki Furuta

Beilstein J. Org. Chem. 2020, 16, 587–595, doi:10.3762/bjoc.16.53

• -EBX reagents. This atom-economical method for the late-stage alkynylation of BODIPY dyes could be an alternate approach for functionalized fluorescent dyes without the need of preparing unstable halogenated pyrrole precursors. The resulting α- and β-ethynyl-substituted BODIPYs displayed distinct

A new approach to silicon rhodamines by Suzuki–Miyaura coupling – scope and limitations

• Thines Kanagasundaram,
• Antje Timmermann,
• Carsten S. Kramer and
• Klaus Kopka

Beilstein J. Org. Chem. 2019, 15, 2569–2576, doi:10.3762/bjoc.15.250

• functionalized with free acid moieties are directly accessible in contrast to previously described methods. Keywords: cross coupling; fluorescent dyes; near-infrared (NIR) dyes; silicon rhodamines; Suzuki–Miyaura coupling; Introduction Silicon rhodamines are versatile fluorescent dyes that found extensive use

Synthesis and properties of sulfur-functionalized triarylmethylium, acridinium and triangulenium dyes

• Marco Santella,
• Eduardo Della Pia,
• Jakob Kryger Sørensen and
• Bo W. Laursen

Beilstein J. Org. Chem. 2019, 15, 2133–2141, doi:10.3762/bjoc.15.210

• of the ethylthiol substituents. For the triangulenium derivatives significant fluorescence was observed (Φf = 0.1 to Φf = 0.3). Keywords: acridinium dyes; aromatic nucleophilic substitution; fluorescent dyes; sulfur-functionalized dyes; triangulenium dyes; triarylmethylium; Introduction The design

• , synthesis and studies of organic fluorescent dyes have witnessed a revival in recent years, in particular due to their applications in imaging and biomedical assays and analytical techniques [1][2][3][4][5]. The desire to detect minute amounts of dye, ideally single molecules [6][7], in complex biological

Synthesis, photophysical and electrochemical properties of pyridine, pyrazine and triazine-based (D–π–)₂A fluorescent dyes

• Keiichi Imato,
• Toshiaki Enoki,
• Koji Uenaka and
• Yousuke Ooyama

Beilstein J. Org. Chem. 2019, 15, 1712–1721, doi:10.3762/bjoc.15.167

• Keiichi Imato Toshiaki Enoki Koji Uenaka Yousuke Ooyama Department of Applied Chemistry, Graduate School of Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi-Hiroshima 739-8527, Japan 10.3762/bjoc.15.167 Abstract The donor–acceptor–π-conjugated (D–π–)2A fluorescent dyes OUY-2, OUK-2

• characteristic band of the (D–π–)2A fluorescent dyes show bathochromic shifts in the order of OUY-2 < OUK-2 < OUJ-2. Moreover, the photoabsorption bands of the (D–π–)2A fluorescent dyes are nearly independent of solvent polarity, while the fluorescence bands showed bathochromic shifts with increasing solvent

• there is little difference in the HOMO energy level among the three dyes, but the LUMO energy levels decrease in the order of OUY-2 > OUK-2 > OUJ-2. Consequently, this work reveals that for the (D–π–)2A fluorescent dyes OUY-2, OUK-2 and OUJ-2 the bathochromic shifts of λmax,abs and λmax,fl and the

Complexation of a guanidinium-modified calixarene with diverse dyes and investigation of the corresponding photophysical response

• Yu-Ying Wang,
• Yong Kong,
• Zhe Zheng,
• Wen-Chao Geng,
• Zi-Yi Zhao,
• Hongwei Sun and
• Dong-Sheng Guo

Beilstein J. Org. Chem. 2019, 15, 1394–1406, doi:10.3762/bjoc.15.139

• pentadodecyl ether (AmC5A) and is less polar than those of CDs. To be noted, as the fluorescent dyes are immersed to different degrees in cavities, the calculated polarities are also influenced by the position of the dyes inside the macrocyclic hosts [10]. The complexation of GC5A with these

Olefin metathesis in multiblock copolymer synthesis

• Maria L. Gringolts,
• Yulia I. Denisova,
• Eugene Sh. Finkelshtein and
• Yaroslav V. Kudryavtsev

Beilstein J. Org. Chem. 2019, 15, 218–235, doi:10.3762/bjoc.15.21

• obtain the ABCBA pentablock copolymers. This copolymer forms nanoparticles with a central hydrophobic core capable of accommodating fluorescent dyes and conventional therapeutics and a hydrophilic biocompatible outer shell. The efficient combination of the ROMP process and click chemistry led to the

Rational design of boron-dipyrromethene (BODIPY) reporter dyes for cucurbit[7]uril

• Mohammad A. Alnajjar,
• Jürgen Bartelmeß,
• Robert Hein,
• Pichandi Ashokkumar,
• Mohamed Nilam,
• Werner M. Nau,
• Knut Rurack and
• Andreas Hennig

Beilstein J. Org. Chem. 2018, 14, 1961–1971, doi:10.3762/bjoc.14.171

• fluorescent dyes directly enables (bio)sensing applications through the indicator displacement principle [16][17]. Therein, the fluorescence properties of a dye are altered when encapsulated by the host, and when a competitive binder displaces the dye from the cavity, the properties of the non-encapsulated

• macrocyclic hosts and dyes that have so far been reported [16] are only of limited use for these currently emerging life science applications of CBs. Many of the fluorescent dyes which bind to CBs with significant fluorescence changes have a limited photostability, in particular under intense laser light

• the macrocycle would be desirable. One possibility is the utilization of monofunctionalized CBs with outer cavity-attached fluorescent dyes [22][24]. This principally allows for the modular construction of various Förster resonance energy transfer (FRET) pairs as demonstrated with a Cy3-attached CB7

Synthetic mRNA capping

• Fabian Muttach,
• Nils Muthmann and
• Andrea Rentmeister

Beilstein J. Org. Chem. 2017, 13, 2819–2832, doi:10.3762/bjoc.13.274

• showing that N7-ethyl and N7-benzyl-modified cap analogues are still substrates for GlaTgs [98]. This allowed us to enzymatically prepare cap analogues with different combinations of functional moieties (Figure 5B) [95]. A 4-vinylbenzyl/azido dual modification allowed appending two different fluorescent

• dyes which could be applied as FRET pair. In this case, labeling was achieved in two bioorthogonal reactions, an iEDDA and a SPAAC reaction. Furthermore, dual modification with an azido and an alkyne function enabled fluorophore/biotin labeling using a combination of SPAAC and CuAAC reaction. Efficient

One-pot syntheses of blue-luminescent 4-aryl-1H-benzo[f]isoindole-1,3(2H)-diones by T3P^® activation of 3-arylpropiolic acids

• Melanie Denißen,
• Alexander Kraus,
• Guido J. Reiss and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2017, 13, 2340–2351, doi:10.3762/bjoc.13.231

• class particularly attractive for the development of novel sensors and fluorescent dyes [38], for instance 6-chloro-2,3-naphthaleneimide derivatives were successfully used for labeling amino acids, and for studying peptide protein interactions [39]. Even the superficial attachment to a binding domain

Curcuminoid–BF₂ complexes: Synthesis, fluorescence and optimization of BF₂ group cleavage

• Henning Weiss,
• Jeannine Reichel,
• Helmar Görls,
• Kilian Rolf Anton Schneider,
• Mathias Micheel,
• Michael Pröhl,
• Michael Gottschaldt,
• Benjamin Dietzek and
• Wolfgang Weigand

Beilstein J. Org. Chem. 2017, 13, 2264–2272, doi:10.3762/bjoc.13.223

• .13.223 Abstract Eight difluoroboron complexes of curcumin derivatives carrying alkyne groups containing substituents have been synthesized following an optimised reaction pathway. The complexes were received in yields up to 98% and high purities. Their properties as fluorescent dyes have been

• attention regarding their properties as fluorescent dyes with fluorescence quantum yields of up to 60% and Stokes shifts of up to 5000 cm−1 [9]. Additionally, the incorporation of the BF2 group forces the β-diketone unit into the enol form, which leads to increased rigidity and enhanced photostability of

• spectroscopy To investigate their properties as fluorescent dyes we measured the UV–vis absorption and fluorescence spectra of the BF2 complexes 2a–h. Measurements were carried out in dichloromethane at room temperature and under ambient atmosphere. The results are shown in Figure 2. All BF2 complexes show

BODIPY-based fluorescent liposomes with sesquiterpene lactone trilobolide

• Ludmila Škorpilová,
• Silvie Rimpelová,
• Michal Jurášek,
• Miloš Buděšínský,
• Jana Lokajová,
• Roman Effenberg,
• Petr Slepička,
• Tomáš Ruml,
• Eva Kmoníčková,
• Pavel B. Drašar and
• Zdeněk Wimmer

Beilstein J. Org. Chem. 2017, 13, 1316–1324, doi:10.3762/bjoc.13.128

• , sensitivity and good spatio-temporal resolution altogether [5]. From the plethora of known fluorescent compounds, there are widely used small organic fluorophores, such as BODIPY dyes. BODIPYs are fluorescent dyes based on the 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene scaffold, which have recently

Glyco-gold nanoparticles: synthesis and applications

• Federica Compostella,
• Olimpia Pitirollo,
• Alessandro Silvestri and
• Laura Polito

Beilstein J. Org. Chem. 2017, 13, 1008–1021, doi:10.3762/bjoc.13.100

• diameter range can be obtained [4]. Moreover, this synthetic procedure allows to introduce different types of carbohydrates and other ligands (i.e., polyethylene chains, lipids, peptides, DNA, RNA or fluorescent dyes) in controlled ratios [4]. A modification of this technique consists in the application of

Investigation of the action of poly(ADP-ribose)-synthesising enzymes on NAD⁺ analogues

• Sarah Wallrodt,
• Edward L. Simpson and
• Andreas Marx

Beilstein J. Org. Chem. 2017, 13, 495–501, doi:10.3762/bjoc.13.49

• introducing small, terminal alkyne functionalities at common sites of the adenine base. Upon successful incorporation into PAR, these alkynes serve as handles for copper(I) catalysed azide–alkyne click reaction (CuAAC) [22] with fluorescent dyes. Terminal alkynes are the smallest possible reporter group that

A postsynthetically 2’-“clickable” uridine with arabino configuration and its application for fluorescent labeling and imaging of DNA

• Heidi-Kristin Walter,
• Bettina Olshausen,
• Ute Schepers and
• Hans-Achim Wagenknecht

Beilstein J. Org. Chem. 2017, 13, 127–137, doi:10.3762/bjoc.13.16

• cannot only be applied for conventional postsynthetic oligonucleotide modification in solution but also on solid phase [11] and for the introduction of multiple postsynthetic modifications [12]. The azide groups for CuAAC are typically placed onto the fluorescent dyes since azides are not compatible with

Benzothiadiazole oligoene fatty acids: fluorescent dyes with large Stokes shifts

• Lukas J. Patalag and
• Daniel B. Werz

Beilstein J. Org. Chem. 2016, 12, 2739–2747, doi:10.3762/bjoc.12.270

• methods are commonly employed. Either unnatural fluorescent dyes are inserted into the membrane (e.g., pyrene) or the hydrophilic part of lipids is utilized for the covalent attachment of fluorophores. Another possibility is the use of fluorescently labelled antibodies which bind membrane components such

A self-assembled cyclodextrin nanocarrier for photoreactive squaraine

• Ulrike Kauscher and
• Bart Jan Ravoo

Beilstein J. Org. Chem. 2016, 12, 2535–2542, doi:10.3762/bjoc.12.248

• class of compounds known as squaraines [13][14][15][16][17][18]. Squaraines are a promising class of fluorescent dyes for PDT. In the past, squaraines showed a very low intersystem-crossing efficiency, leading to the premature conclusion that these dyes cannot be used in PDT [19]. Santos et al. showed

Application of Cu(I)-catalyzed azide–alkyne cycloaddition for the design and synthesis of sequence specific probes targeting double-stranded DNA

• Svetlana V. Vasilyeva,
• Vyacheslav V. Filichev and
• Alexandre S. Boutorine

Beilstein J. Org. Chem. 2016, 12, 1348–1360, doi:10.3762/bjoc.12.128

• fluorescent probes via their labeling by commercial and "home-made" fluorescent dyes bearing azide groups. It was noted that yields of alkyne-modified MGBs were higher (50–83%) compared to those of azide modified MGBs (≈40%). The other variant for insertion of terminal azide or alkyne groups into the

Indenopyrans – synthesis and photoluminescence properties

• Andreea Petronela Diac,
• Ana-Maria Ţepeş,
• Albert Soran,
• Ion Grosu,
• Anamaria Terec,
• Jean Roncali and
• Elena Bogdan

Beilstein J. Org. Chem. 2016, 12, 825–834, doi:10.3762/bjoc.12.81

• derivatives have been found to act as potential candidates for electroluminescent devices due to their fluorescent properties. Fluorescent dyes have lately attracted considerable interest owing to their wide range of applications in various fields. For example, naphthopyrans (e.g. 3,3-diphenyl-3H-naphtho[2,1

New synthetic strategies for xanthene-dye-appended cyclodextrins

• Milo Malanga,
• Andras Darcsi,
• Mihaly Balint,
• Gabor Benkovics,
• Tamas Sohajda and
• Szabolcs Beni

Beilstein J. Org. Chem. 2016, 12, 537–548, doi:10.3762/bjoc.12.53

• fluorophores for labeling in order to assess if these versatile molecules cross biological barriers (e.g., cell membrane, blood–brain barrier) and to follow their distribution in living matter [3]. Among the fluorescent dyes, the group of fluorophores based on xanthene scaffolds is one of the most popular. Two

• spectrum resulted in the proposed model (shown in Figure 8) for the intermolecular inclusion mode of the compound. Conclusion A novel green synthetic strategy for obtaining single isomer, xanthene-appended cyclodextrin was developed. The synthetic approach is based on commercially available fluorescent

• dyes and coupling agents, thus having clear potential for multigram scale-up. The mild, aqueous conditions, as well as the simplicity of the synthesis, make these reactions attractive tools for the preparation of fluorescent cyclodextrins connected through an amide bond. The obtained products were